Vacuum devices / Vacuum chambers / FPD production equipment / Semiconductor manufacturing equipment / Electron microscopes
Characteristics
Small head screws with ventilation holes. Because the head diameter is small, spot facing diameters can be reduced compared to standard hex socket head cap screws.
The ventilation hole easily releases gas trapped in the screw holes of equipment and machines, and supports vacuum drawing of vacuum devices.
SUS316L is a stainless steel made by adding Mo to SUS304, so it has high pitting resistance and oxidation resistance. Due to its reduced carbon, it also has high intergranular corrosion resistance. This screw also has corrosion resistance against chemical products and seawater environments that matches or exceeds SUS304.
Gas trapped at the bottom of the screw hole is released through SVSL-SD, and gas trapped in the drilled hole is released through SWAS-VF.SWAS-VFSWAS-VF-PC
It is possible to perform spot facing and hide the head in locations where spot facing is not possible with standard hex socket head cap screws.
Precautions for Use
Since the head bearing surface area is small, the bearing surface pressure increases.
Using the following formula as a reference, ensure that the bearing surface pressure due to screw tightening does not exceed the permitted surface pressure of the intended fastening material.
Head Diameter and Screw Effective Cross-Sectional Area
Part Number
Head Diameter (mm)
Screw Effective Cross-Sectional Area (mm2)
SVSL-M2-SD
3
2.07
SVSL-M3-SD
4.5
5.03
SVSL-M4-SD
5.5
8.78
SVSL-M5-SD
7
14.2
SVSL-M6-SD
8.5
20.1
SVSL-M8-SD
11
36.6
Related Products
For ventilation of drilled holes, please use SWAS-VF.SWAS-VF